More than half a century
in the market!

Product catalog New product

Speaker cables

КАВП, КАСВ
TS BY 500017371.084-2017

DESIGNATION

Cables are designed for signal transmission from audio frequency amplifier to sound-reproducing systemswith alternating voltage of 42 V and 50 kHz frequency inclusively or direct voltage of up to 60 Vinclusively.

Cables are designed for connection of receivers or loudspeaker amplifiers, communications-electronics equipment, battery chargers to sound-reproducing equipment as well as for kitting of portable vehicle lamps and connection of other electrical equipment.

Cable model

Definition

КАВП

Speaker cable with parallel laid copper conductors, in PVC insulation, flexible

КАСВ

Power speaker cable with copper conductor, in PVC insulation, flexible

Cable model, number of conductors and their rated areas, rated insulation thickness and outer dimensions shall correspond to the details specified in the table below:

Cable model

Rated conductors'quantity and area, mm²

Rated insulation thickness, mm

Outer dimensions, mm

min.

max.

КАВП

2×0.75

0.6

2.1×4.2

3.0×6.0

 

2×1.0

0.7

2.4×4.7

3.3 ×6.5

 

2×1.5

0.8

2.8×5.7

3.7×7.5

 

2×2.5

1.0

3.6×7.2

4.6×9.5

 

2×4

1.3

5.0×10.0

6.5×13.5

 

2×6

1.3

6.0×12.0

7.5×15.5

 

2×10

1.5

7.0×14.0

8.5×17.5

КАСВ

1×4

1.3

5.0

6.5

 

1×6

1.3

6.0

7.5

 

1×8

1.7

7.0

8.5

 

1×10

1.7

7.5

9.0

 

1×16

1.7

8.0

9.5

 

1×20

1.7

9.0

10.5

 

1×25

2.0

10.5

12.0

 

1×35

2.0

11.5

13.0

 

1×50

3.0

16.0

17.5

ARRANGEMENT

CONDUCTOR:copper, solid

INSULATION: PVC compound

NUMBER OF CONDUCTORS:1 (forКАСВ model); 2 (forКАВП model)

CONDUCTORAREA,mm²:0.75; 1.0; 1.5; 2.5; 4; 6; 8; 10; 16; 20; 25; 35; 50

TECHNICAL SPECIFICATIONS

 

Operationaltemperature range - from -40°Сto +70°С

Maximal operatingconductor heating temperature - not more than +70°С.

Cables shall not spread combustion when single laid.

Minimal operating cable bend radius when cabling or operating shall not be less than twenty outer cable diameters. For flat ribbon cables - not less than twenty outer cable diameters by thinner side.

Factorycablelength - not less than 20 m.

Operational life of cables - not less than 10 years.

Regulations: Technical Specifications BY 500017371.084-2017